Q)   I have had one other machine that has had some issue with Legend B5II table plasma cutting machine it was waiting for green button every cycle and they had the WENTAI on, they turned this if and now it will not arc until they press green button each cycle can you give me some help with this question please.

A) Set GG3 code to set the machine to factory set parameters
How to set GG3 Code?
A.      Power ON the machine
B.      When main screen appear press “GG3” (That is Alphabet “G” two times and number”3” one time)
C.      A three option window will come
·         PARAMETER :-select this is you want to set the parameters values of the CNC to the factory set values.
·         FORMAT:- To remove (format) all the saved contents on the CNC machine.
·         Chinese :- To change the language used in the controller menus.

Q:Why Legend B5II plasma cutting machine water pump doesn’t work?

A: The water pump for Legend B5II requires a 220Volt AC power supply. If your country is having 110volt supply, you need to use a 110 to 220 voltage converter.

Q:Can Hypertherm´s ArcWriter adapted to a Dragon or Legend plasma cutting machine?

A:There shouldn’t be any problem in connecting the machine with the CNC machine. The only thing that concern us is if the THC holder is correct size to fix the ARC write torch directly you may have do some modification.
The Torch diameter of Arc right is 3.81 cm

The torch diameter of usual air plasma machine is 2.5 cm.
Please contact the after sales team for the plasma ARC Write manual and the connection details.